Replacement Locks For Patio Doors at Lowe's
Replacing a patio door lock is a straightforward and efficient way to increase the security of your home. But, it is crucial to maintain the lock regularly and install the lock correctly.
To successfully replace the lock on your patio door, it is vital to know what kind of lock your current lock is. The screw hole size and type of end faceplate will help you identify the kind of lock you are replacing.
Identifying Your Existing Lock
If you're considering buying new hardware for your lock it is essential to understand the differences between various kinds of locks. This will help you choose a lock that is perfect for your home, and will ensure the security and safety of your home.
The most popular lock is the cylinder lock. It's also called pin-and-tumbler locks. This type of lock makes use of a combination of top pins, bottom pins and springs to keep the key hole and plug in place. Cylinder locks can be found in a variety of different sizes, and it is important to determine the exact length and width of your current cylinder before buying an alternative.
To measure the width to determine the width, loosen the screws that keep the cylinder in place and slowly pull it out. Then, take a measurement in millimeters that lies between the outer edge and the inner end of the cylinder. Compare this number to the measurements of the lock you intend to purchase. This will ensure your new lock will fit the existing door lockhole.
Another way to determine the proper size of the lock you have is to test it with the help of a key. If the key slides into the cylinder easily and is in the correct size, it's the width of the rekeying kit that you need. If the key doesn't slide in, it is likely that the cylinder has different keyways and cannot be rekeyed to accept the brand of key.
It is recommended to read the manufacturer's instructions included with a kit for rekeying and each lock comes with its own set of installation requirements. It is recommended to take the time to thoroughly test the new lock after you have installed it to ensure that it is working well and gives you maximum security. It is also important to be aware of any additional features your new lock might include in order to determine how easy it is to operate.
Measure the Width
A faulty patio door lock could lead to serious security concerns. It is essential to check regularly your locks and replace them if necessary. This ensures that they're secure and operating well, and can assist in preventing problems such as a loose latch or keyway. If your locks are worn out or damaged, you can get replacements at Lowe's which will offer the security you require for your home.
It is crucial to measure the door to your patio before purchasing an additional lock. This will give you a clear idea of the size you should buy and avoid the risk of purchasing a lock that doesn't fit. You'll need two measurements to complete this task: the backset and the case depth. The first measurement is the distance between the edge of the lock's face and the center of the hole through which the handle spindle goes through. The second refers to taking a look at the depth of the lock from the outside.
It's also important to think about the way you will use your doors when choosing the type of lock you'll need. If click the following page sliding doors swing horizontally, you'll require top and bottom tab locks that engages with the strikeplate, preventing it from being pushed or forcefully opened. If your patio doors open vertically, you will have to select a mortise latch with an attached hook latch that is spring loaded for extra security.
When determining the dimensions of the lock you have, it's essential to note the position of the screw holes. Certain mortise locks feature round screws, while others have square ones. You'll also be required to know the position of the keyway. Some keys have a vertical design, while others are tilted at 45 degrees. It's a good idea to take a photo of the lock you have in place using your digital camera prior to attempting to remove it to ensure you get the right replacement.
Once you've made the measurements now is the time to start looking for a new patio door lock. You can find a range of high-quality products online and many of them are branded that offer sophisticated security features that will protect your home. The choice of a lock is an investment in your home's safety, so it's important to do some research and read reviews prior to buying. Don't forget to clean your locks regularly to stop dirt and other debris from interfering with the function of your doors.
Make sure you check the screw holes
Patio doors play an important role in securing your home. They should be examined for signs of wear and tear to ensure they're operating properly. As time passes the spindle and locks that connect your exterior and interior handles could require to be replaced. A durable lock will not only block unwanted entry but can also improve energy efficiency, safety, and security.
There are many ways to narrow your search for a new lock if you don't have the specific model. First, you must determine the kind of keyway employed. Aluminum patio doors are usually fitted with mortise locks that are rectangular cutouts, while E2126 or E2079 locks are set in a recess within the frame. Uploading a photo of the lock with your digital camera can help you determine the type of lock you have.
You can also determine the type of lock by examining the screw holes. Most sliding patio door locks have screw holes that align with the latch keeper mounted on the side jamb, but they may not be identical. Some screws may be longer than others, or have a different threaded finish. Some screws also have washers or a hex bolt attached to them which may affect how they fit into the lock hasp.
If you are aware of the kind of lock your home is secured with, you can begin planning to replace it. First, you'll want to clean the lock with a damp brush or cloth to remove any debris or dirt that could be affecting its operation. After cleaning, you can apply a silicone-based oil to keep the locking mechanism in good shape and quiet.
After that, it's a great idea to replace the old screws with longer ones. This will allow you to get more grip and also install the lock more easily. After you've completed that it's a good idea to check the handle to see how the latch hasp is engaged inside the lock.
If it isn't able to engage easily You may have to place an hex nut or washer behind the hasp in order to get it to be able to grip more of the door's lip. You can even add a shim to one side of the lock keeper on the jamb to see if that helps.
Check the Lock Snib
The snib is the lock mechanism located inside your door handle. You can turn on and off the snib in order to open and close your patio doors. It is the first thing to look at in the event that your locks aren't working properly. You should also check the keepers (located at the top and bottom of the door frame) for any looseness or misalignment that could cause them to break. Make sure that your snib lock has been seated correctly and that the lock has not become stuck or blocked in any other way.
The most popular patio door locks are mortise locks made of steel that lock sliding glass doors. They are inserted into the frame of the door and are available in a variety of styles which makes them a great security measure. Some are designed to fit keys, while some have an oval cutout for easy locking and unlocking.
A step-on lock that is a thumb screw is another option that is popular. It keeps your sliding door in place without having to turn the knob. These locks are typically used on older patio doors, but could be a great choice for securing wood- or vinyl-framed sliding doors too.
If you look over your current patio lock, note the type and size of screw holes used to attach the escutcheon and the lock body. This will allow you to select a replacement lock with the correct screw holes for the specific hardware for your patio door. It's also a good idea to examine your strike plate and make sure it's securely secured.
If you own Jason Windows boltlock slider doors from 2000-2009 make sure that the keeper screws remain in place and are not loose or missing. The screws hold the snib at a partially open "vent" position to allow airflow, but also encourage security. They are essential for preventing the lock from breaking. It's also a good idea for all locks to be checked regularly and cleaned regularly to avoid dirt, debris and corrosion from obstructing the operation of the lock.
If your snib has broken you might be able to replace the entire strikeplate and the snib. If your snib only requires alignment it can be corrected by removing the strikeplate an abrasive blade and backing out the adjustment screws (located above and beneath the screw). Then, you'll need to move the strikeplate up or down until the engagement tongue lines up the Milgard logo.